How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Thickness
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 11 months ago #1808 by Archived Forum Admin
Thickness was created by Archived Forum Admin
We want to control thickness and diameter of automotive wire in line extruder. What instruments can we use for measuring wall thickness and diameter.
Thanks with best regards.
Thanks with best regards.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #1809 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Thickness
Hello rahm,
Take a look Zumbach Instruments AG (Switzerland) www.zumbach.ch Of particular interest is the UMAC® Wall Thickness Measurement which uses ultrasonics. www.zumbach.ch/e/product/umac.asp This, combined with laser diameter monitors, will give you all you need to know.
Sikora AG (Germany) www.sikora.net/ also has an X-ray/ laser diameter monitor system for automotive wire called Ecocontrol www.sikora.net/products/ecocontrol/
We suggest that you study the information carefully on the Internet before contacting each of them directly with your minimum requirements.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
Take a look Zumbach Instruments AG (Switzerland) www.zumbach.ch Of particular interest is the UMAC® Wall Thickness Measurement which uses ultrasonics. www.zumbach.ch/e/product/umac.asp This, combined with laser diameter monitors, will give you all you need to know.
Sikora AG (Germany) www.sikora.net/ also has an X-ray/ laser diameter monitor system for automotive wire called Ecocontrol www.sikora.net/products/ecocontrol/
We suggest that you study the information carefully on the Internet before contacting each of them directly with your minimum requirements.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #1810 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Thickness
It should be mounted with a lump and neck down detector. That will regulate the other instrumentation when very unusual measurements occur.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.097 seconds