Wirenet Image Band
wirenet.org mobile image band
× All general discussions regarding the wire and cable industry should go here.

Training

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #66 by Archived Forum Admin
Training was created by Archived Forum Admin
I am looking for training videos for wire and cable manufacturing operations. We have found videos relating to extrusion, but have not been able to locate for other departments such as cabling or braiding. Can anyone provide a source?

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #67 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Training
No videos but how about some reading from the Wire Association?

Check this out (Hot off the presses!): www.wirenet.org/waistore/productdetail.cfm?productid=172

Kindest regards,
Peter J. Stewart-Hay

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #68 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Training
To the best of my knowledge no videos exist on these particular subjects and most literature is limited to basics. We offer training courses for Double Twist machines in particular and can elaborate on the rest of the cabling stranding processes.

Best Regards,

Willy Hauer

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 2 months ago #69 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Training
I know people that will make training videos for you. The problem is that in the end a turnkey 10 to 20 minute video will cost between $8K and $15K. It would take dozens of hours of taping to edit to get the 10 to 20 minues of meaningful tape.

Richard

Please Log in to join the conversation.

More
10 years 1 month ago - 10 years 4 weeks ago #2741 by Mr Lalit Verma
Replied by Mr Lalit Verma on topic Re: Training
Hey i did some research for you and i have found a video. Hope it will help

www.google.co.in/url?sa=t&rct=j&q=&esrc=...mg-bOvoa4zOaQ4GBIrnA
Last edit: 10 years 4 weeks ago by Peter J Stewart-Hay.

Please Log in to join the conversation.

More
8 years 8 months ago #2882 by Richard Burke
Replied by Richard Burke on topic Re: Training
If you have or can get UTube do a search for Wire Drawing as there are several there. I did not look at them but I think they could be helpful

Please Log in to join the conversation.

Moderators: Erik A MacsPeter J Stewart-Hay
Time to create page: 0.081 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777