Taihan Cable & Solution Co. (Taihan Cable) held a completion ceremony on Sept. 9 at its new optical fiber plant, Taihan Kuwait, located in the Mina Abdullah Industrial Area, southeast of Kuwait City.

Per a report in Yonhap, the factory spans 5,000 sq m, with production facilities and testing equipment identical to those at Taihan’s Dangjin cable factory. The Kuwait plant will help Taihan Cable expand into the Middle East market. The project was done through a partnership with a local builder, Rank General Trading and Contracting Co.

Taihan Kuwait was scheduled to start full-scale production of certified production in September. With the addition of the Kuwaiti plant, Taihan Cable has seven production facilities, the others include three in South Korea, one in Saudi Arabia, one in South Africa and one in Vietnam. The ceremony included speeches, a report on the establishment of the corporation and a tour of the factory.

The article said that Taihan Cable aims to dominate the Kuwaiti optical cable market, which has relied entirely on imports. Demand for optical cables is expected to rapidly grow in line with the launch of “New Kuwait 2035,” a mid-to-long-term national development plan. “Taihan plans to secure the Kuwaiti market and expand into neighboring GCC countries, such as Saudi Arabia and Qatar, leveraging its network which has been supplying cables throughout the Middle East for over 50 years.”

“Establishing production infrastructure in Kuwait, following our Dangjin cable factory, will allow us to respond actively to the growing global demand for optical fiber cables,” said Taihan Cable Vice Chairman Song Jong Min. “We will continue to enhance national competitiveness by expanding global operations through continuous localization of production.”

AT&T has agreed to remove some six miles of lead cables that have been submerged in Lake Tahoe for decades, per a settlement agreement.

Per multiple news reports, AT&T will remove approximately 107,000 pounds of unused cables in the agreement with the California Sportfishing Protection Alliance (CSPA), which in a 2021 lawsuit claimed that lead from the cables was contaminating multiple areas of the lake and creating a widespread risk of exposure. Elevated levels of lead were confirmed in both the water and sediment around the cables, according to the lawsuit. Lake Tahoe, a freshwater lake in the Sierra Nevada, straddles the border between California and Nevada.

CSPA said that the paper-wrapped copper wire cables are composed of spiral-wound steel rods and coated with a fiber layer impregnated with bitumen tar. Each foot of these cables has about 3.39 pounds of lead, and there are about six miles of submerged cables. A study by scientists hired by the CSPA’s attorneys found that biofilms (algae) that are a food source for fish had lead concentrations 67,000 times higher in samples taken from the cables compared to those taken from a rock.

AT&T maintained that multiple expert analyses found that the telecom cables in the lake pose no threat to public health or the environment. “While we’re confident in the strength of our case and the safety of the cables, this settlement represents an amicable resolution to litigation.”

The cables were discovered 12 years ago by divers on the sandy bottom of the lake by the Pacific Bell Telephone Company a century ago. Three years ago, the California Sportfishing Protection Alliance (CSPA), a nonprofit advocacy group, sued AT&T to have them removed after their discovery.

Poland’s Herco Sp. z o.o. (Herco), has started to expand its plant, an initiative that it reported was made possible through co-financing from the European Union.

Per a statement and details at the company’s website, Herco reports that the company produces its nails at its factory in Cieladz, using modern nail headers. The company was founded as a cement mixer in Lowicz, Poland, in 1993, and two years later a new production site was bought in Rawa Mazowiecka, a small town 70 km from Warsaw. In 1999, it bought its first nail machines and two years later it bought equipment from Enkotec, whose models now make more than 80% of its nails.

In 2009 Herco invested in building a new and energy efficient factory. In 2010, the company moved to the new production unit in Cieladz, 10 km from the old location in Rawa Mazowiecka. That allowed Herco to increase the efficiency and the quality of its products, while reducing the environmental impact. In 2014, its state-of-the-art, hot-dip galvanizing line for small parts and case nails, started operations. Now, it is making a further investment, this time by the European Funds for Modern Economy program, using the SMART Path action to further its R&D innovations.

NKT will deliver 545 km of onshore power cables to transmission system operator Elia Transmission Belgium (ETB) for a major grid upgrade.

A press release said that the order for the cable will strengthen Belgium’s transmission grid, and was received under an existing framework agreement between NKT and ETB., which manages the high-voltage transmission grid that has some 9,000 km of overhead lines and underground cables. The latest order is related to a prior order of 72 km of 380 kV AC onshore power cables recently awarded under the same agreement.

“This is one of the largest orders in the segment 70 kV and 150 kV AC onshore NKT has ever received and shows the importance of the lower high-voltage levels in the transmission grid,” said Lukas Sidler, EVP, HV Solutions Cologne. The cables will be produced at NKT’s Cologne, Germany, and Velke Meziříčí, Czech Republic, factories, with delivery and installation planned from 2025-2027.

In Belgium, electricity consumption is expected to rise by 50% by 2032 while renewable energy sources are adding more power to the system. In 2023, Belgium generated a record-breaking 21.5 TWh (a 23% increase compared with 2022) from wind and solar generation, making up 28% of the country’s electricity mix.

In other news, NKT reported that it is expanding its operations in Alingsås, Sweden, to boost the production capacity of high-voltage accessories. The company is currently constructing a new hall in Alingsås for testing power cable accessories up to 525 kV that is needed to meet what the company described as the growing demand driven by the transition to renewable energy. Besides boosting the production capacity of high-voltage accessories, with the new hall NKT is seeking to enhance its research and development efforts.

“With our new high-voltage test facility, we’re meeting NKT’s strong growth in the global market. This investment in Alingsås enables us to support the renewable transition by supplying complete power cable systems for on- and offshore wind parks and interconnectors,” said John Sjöström, Head of Operations at NKT in Alingsås.

Poland’s Tele-Fonika Kable S.A. (TFKable) has won an order for onshore cables and accessories by the developers of Bałtyk 2 and Bałtyk 3, two offshore wind farm projects in the Baltic Sea.

A press release said that the contract from Equinor and Polenergia will require 85 km of onshore HV export cables (220 kV) which will connect the offshore substation to the onshore substation. The order also calls for 38 km of onshore EHV cables (400 kV) that will connect the onshore substation to the PSE power station. The project also includes the supply and installation of accessories. The wind farms have a combined capacity of 1440 MW

The wind farms will be located in Poland’s economic zone in the Baltic Sea, about 22 km to 37 km from the coastline. The first energy from both projects is expected to flow into the grid in 2027, with full commercial operation planned from 2028.

The cable will be made at TFKable’s facility in Bydgoszcz, located approximately 250 km from the construction site. The choice of a local supplier underscores the significance of Polish involvement in this project and supports the development of modern renewable energy infrastructure.

Piotr Mirek, Member of the Management Board at TELE-FONIKA Kable and Supply Chain and Investment Officer at JDR Cable Systems, added, “Tele-Fonika has extensive experience in providing advanced cable solutions for the energy sector, as evidenced by our participation in projects such as Baltic Power and Baltica 2. Our involvement in the Bałtyk 2 and Bałtyk 3 projects continues our commitment to the development of renewable energy sources in the Baltic Sea. By collaborating with local suppliers, these projects will not only contribute to the economic growth of the region but also enhance the country’s energy security.”

The Bałtyk 2 and Bałtyk 3 projects include the installation of 100 wind turbines, two offshore substations, submarine export cables, and a full energy and telecommunications infrastructure. The HV and EHV onshore cables will be made at the Bydgoszcz facility, part of the TFKable Group. Deliveries are expected to start in January 2025, with project completion expected by November 2026.