How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Wire Payoff
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 11 months ago #1888 by Archived Forum Admin
Wire Payoff was created by Archived Forum Admin
I am looking for information on how to payoff galvanized steel wire (0.4 and 0.5 mm) wire from coils without the expense of a motorized payoff. The coils come from Romania and I am not sure how they were wound. Can anyone refer me to someone who could help?
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #1889 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Wire Payoff
Hi there,
(1) Press on Virtual Trade Show Logo above.
(2) Click on the "Search Now" button.
(3)Select: Business Type(s) "Wire Machinery Manufacturer".
(4)Select: Product(s) "payouts-flyer payoffs".
(5) Press: "Submit Query" button. - There are 67 suppliers.
(6) Give the ones you select the coil dimensions and the weight as well as the material and the wire sizes and then wait for their reply.
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
(1) Press on Virtual Trade Show Logo above.
(2) Click on the "Search Now" button.
(3)Select: Business Type(s) "Wire Machinery Manufacturer".
(4)Select: Product(s) "payouts-flyer payoffs".
(5) Press: "Submit Query" button. - There are 67 suppliers.
(6) Give the ones you select the coil dimensions and the weight as well as the material and the wire sizes and then wait for their reply.
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #1890 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Wire Payoff
If you are not sure how they are wound, it is hard to be much more than speculative as to what will work. There are a lot of solutions, but first you must know more about the problem.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.088 seconds