How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Instrumentation cable testing
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 11 months ago #2237 by Archived Forum Admin
Instrumentation cable testing was created by Archived Forum Admin
Can any one suggest a LF/HF test equipment manufacturer for instrumentation cable testing (to BS 5308)?
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2238 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Instrumentation cable testing
Hello,
A good starting spot would be to contact the following companies but prepare a proper specification for them first with your expectations. It is not acceptable to just reference some British Specification and sit back and wait they rush around trying to find out the information that you should have at your fingertips.
If these companies don't have what you want need, obtain a recommendation from each of them as to whom you should be dealing with.
AESA Cortaillod
www.aesa.ch/
DCM Industries, Inc
www.dcmindustries.com/
Hipotronics, Inc.
www.hipotronics.com/
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
A good starting spot would be to contact the following companies but prepare a proper specification for them first with your expectations. It is not acceptable to just reference some British Specification and sit back and wait they rush around trying to find out the information that you should have at your fingertips.
If these companies don't have what you want need, obtain a recommendation from each of them as to whom you should be dealing with.
AESA Cortaillod
www.aesa.ch/
DCM Industries, Inc
www.dcmindustries.com/
Hipotronics, Inc.
www.hipotronics.com/
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 11 months ago #2239 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Instrumentation cable testing
Thanks a lot Peter. I do have the required information for the equipment manufacturer, also i am in touch with two of the mentioned sources. Thanks again.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.103 seconds