How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Smoke density of FRLS PVC
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 11 months ago #187 by Archived Forum Admin
Smoke density of FRLS PVC was created by Archived Forum Admin
Generally what is the minimum light transmittance value for FRLS PVC jacketed cables when tested to IEC 61034 for smoke density testing?
If no value mentioned by the client IEC 61034 states 60% as the minimum light transmittance. Do you think FRLS PVC compounds available currently meet this requirement?
Appreciate if you could throw some light on this subject.
Regards,
Bhognath
If no value mentioned by the client IEC 61034 states 60% as the minimum light transmittance. Do you think FRLS PVC compounds available currently meet this requirement?
Appreciate if you could throw some light on this subject.
Regards,
Bhognath
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 11 months ago #188 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Smoke density of FRLS PVC
Hello shiv007,
The only way to answer your question properly would be to test your particular cable to see if the minimum light transmittance is indeed at least 60%. Thus, this is what we recommend you do.
After the test, your advice would sure be appreciated.
Kindest Regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
The only way to answer your question properly would be to test your particular cable to see if the minimum light transmittance is indeed at least 60%. Thus, this is what we recommend you do.
After the test, your advice would sure be appreciated.
Kindest Regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 11 months ago #189 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Smoke density of FRLS PVC
I just like to know on what you need this information.
FR or FR-LS or FR-LSH or FR-LS-H0.
FR or FR-LS or FR-LSH or FR-LS-H0.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.067 seconds