How to resolve AdBlock issue? × Nonferrous topics such as copper and aluminum, annealing, etc. go here.
Decolouration
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 11 months ago #1296 by Archived Forum Admin
Decolouration was created by Archived Forum Admin
Discoloration
I am trying to anneal a copper-zinc alloy with a 7% zinc and 93% copper in a nitrogen-hydrogen environment. The problem is that the color of my wire changes from red to yellow.
Please suggest at what temp should I use nitrogen and to what extent should I anneal it.
I am trying to anneal a copper-zinc alloy with a 7% zinc and 93% copper in a nitrogen-hydrogen environment. The problem is that the color of my wire changes from red to yellow.
Please suggest at what temp should I use nitrogen and to what extent should I anneal it.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 11 months ago #1297 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Decolouration
Hello anil,
This is considered a bronze alloy and I don't have an answer for you but I do know where two spots where you may be able to get a proper answer.
The first is the Copper Development Association Inc. at www.copper.org/
Go to "Resources" / "Questions?". Fill out the form and state your question there.
The second is EBNER Industrieofenbau (Austrian) at www.ebnerfurnaces.com/
I suggest you contact the Manager of the Service Department, Hermann Fleischanderl at This email address is being protected from spambots. You need JavaScript enabled to view it.
Please let us know how you make out.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
This is considered a bronze alloy and I don't have an answer for you but I do know where two spots where you may be able to get a proper answer.
The first is the Copper Development Association Inc. at www.copper.org/
Go to "Resources" / "Questions?". Fill out the form and state your question there.
The second is EBNER Industrieofenbau (Austrian) at www.ebnerfurnaces.com/
I suggest you contact the Manager of the Service Department, Hermann Fleischanderl at This email address is being protected from spambots. You need JavaScript enabled to view it.
Please let us know how you make out.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.088 seconds