×
Nonferrous topics such as copper and aluminum, annealing, etc. go here.
tranding Die Design
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
Less
More
13 years 1 week ago #1332
by Archived Forum Admin
tranding Die Design was created by Archived Forum Admin
Hello everyone,
I am searching for specific stranding die design guidelines. Including angles and dimensions.
Anybody know where to find this information?
Best Regards,
Raffaele
I am searching for specific stranding die design guidelines. Including angles and dimensions.
Anybody know where to find this information?
Best Regards,
Raffaele
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
13 years 1 week ago #1333
by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: tranding Die Design
Hello Raffaele;
You have posted this thread in the Nonferrous section so the first question is " Are you referring to bare wire only?"
If your answer is "Yes" to the above question you could be referring to 7 or 19 wire strands in a single or double twist strander, closing layers of self damping ACSR or closing a 1600 square millimeter Milliken conductor. In other words, the information you provide is the most important thing.
Please clarify your question including the metal and design you are referring to. Thank you.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641-3212
You have posted this thread in the Nonferrous section so the first question is " Are you referring to bare wire only?"
If your answer is "Yes" to the above question you could be referring to 7 or 19 wire strands in a single or double twist strander, closing layers of self damping ACSR or closing a 1600 square millimeter Milliken conductor. In other words, the information you provide is the most important thing.
Please clarify your question including the metal and design you are referring to. Thank you.
Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641-3212
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.065 seconds