Die soap

Hi all,
I am looking for die soap for galvanized wire drawing now I am using CONDAT SECALE but there are lots of residual on wire. please give me your advise to prevent residual and to get brightness.
thanks.

Hi There,

There are 35 suppliers listed in the Virtual Trade Show (Logo Above) including Condat S A.

Go to Products and select Lubricants - Soap Powders.

Then click on View Details for the individual contact information. We suggest that you talk with Condat and with a few other selected suppliers re your issues.

Kindest regards,

Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Good afternoon,
I can suggest changing the lubrication box instead of changing the lubricant that you are using. We have supplied various bright wire manufacturers a rotating die unit with a 2 stage die box that uses a liquid tank that cleans the wire prior to its final pass through the die.
Please feel free to contact us directly at www.HowarEquipment.com

To obtain brghtness on the drawn galvanized wire you might have to remove the lubricant on the last die or if possible to use a liquid lubricant in the last die.

To diminish the residual you could try a sodium base lubricant at lest on the last dies .

The recomendation is related to the number of passes and reductions used .

Kindest Regards

Eduardo Anaya

I read your difficulty, my company manufactures die soap and can help you with the problem, contact me.

Jagdish.
With Regards